RL 941

The RL 941 has been designed for both the professional user at medium-size to large audio, video and film studios and for the discerning music enthusiast. The directivity index has been optimised to listening distances between 2.5 and 4 metres. Low and middle frequencies are reproduced by a specially designed 8-inch cone loudspeaker. In the treble range, the RL941 features three vertically arranged 1-inch tweeter calottes that are located coaxially in front of the woofer/midrange system. The bass reflex system, designed to deliver optimal transient fidelity, ensures a precise and dry bass reproduction down to a threshold frequency of 40 Hz. Thanks to the powerful integrated analogue amplifiers and the high system efficiency, this loudspeaker combines the flawless homogeneity with a dynamic range that is unrivalled in a two-way system. The result is that non-linear distortions stay extremely low even at high reproducing levels. Moreover, the loudspeaker features group delay time optimization. Summing up all the constructive measures, the RL941 achieves seamless sound compatibility with all other products made in the our manufacture. The highly neutral tone quality, excellent spatiality performance and stage depth arrangement, together with fatigue-free monitoring of even most complex sound events are typical ME Geithain characteristics of this loudspeaker.

The power amplifier module with electronic crossover is integrated into the rear wall of the cabinet and can be swung out for maintenance purposes. An intermittent LED signalises overmodulation. If the maximum level is exceeded, the output level will be attenuated by 20 dB in order to protect the components from overloading. For adapting the frequency response to the acoustic characteristics of the reproduction room, a low-frequency room compensation can be achieved within two continuously variable frequency bands.

A variety of special stands and racks is available as accessories. According fixing elements have been integrated into the loudspeaker cabinet.
active 2-way-monitor for listening distances between 2.50 and 4 m
Maximum SPL
from 100 Hz ... 6 kHz

110 dB ... 116 dB / r = 1 m (3.3 ft)
38 Hz ... 20 kHz ± 3 dB
Acoustic output level / PE = - 14 dBu 

89 dB / r = 1 m (3.3 ft)
Directivity index
from 100 Hz ... 10 kHz

increasing from 2 to 13 dB
Inherent noise sound level
≤ 7 dB (A) / r = 1 m (3.3 ft)
Total harmonic distortion
measured at 96 dB / r = 1 m (3.3 ft)
from 100 Hz ... 10 kHz 

≤ - 40 dB
Nominal input level
+ 6 dBu adjustable
Input impedance
≥ 10 kOhm RC balanced
Electronic crossover frequencies
1.8 kHz
Nominal output power  MOSFET-amplifier

150 Watt / 4 Ohm
100 Watt / 4 Ohm
Input connector
Loudspeaker systems

205 mm (8") cone 
3x 25 mm (1") dome
Operation and Clipping indicator
LED on front side
Power requirements
230 Volt (± 10 %), AC, 50 Hz
115 Volt (± 10 %), AC, 60 Hz
100 Volt (± 10 %), AC, 60 Hz
Power consumption
30 VA at standby; max. 180 VA at full load
Mains Connection
IEC power connector
Dimensions (H x W x D)
398 x 254 x 345 mm (15.6 x 10.0 x 13.6 in)
18.6 kg (40.3 lbs)
Temperature requirements
    for use
    for storage

+ 15°C ... + 35°C (59°F ... 95°F)
- 25°C ... + 45°C (- 13°F ... 113°F)
45 ... 75 %
Design of the Cabinet
MDF-wood in ash black veneered; optional different veneers or colors
with holding device; optional without holding device
RL 904 Gabelständer
Floor bracket stand
Loudspeaker rotable mounted
Deliverable heights (Top edge loudspeaker): 1184 mm (46.6 in), 1414 mm (55.7 in), 1544 mm (60.8 in) and 1684 mm (66.3 in)
Base panel (W x D): 520 mm x 450 mm (20.5 in x 17.7 in) oder 380 mm x 430 mm (15.0 in x 16.9 in)
Base panel and stabilisation panel veneered
Racks black powder-coated
RL 940 Standfuss
Integrated cable duct in the pedestal
Height (Top edge loudspeaker): approx. 1109 mm (43.7 in)
Base panel (W x D): 275 mm x 365 mm (10.8 in x 14.4 in)
Pedestal veneered
RL 940 Wandhalterung
Wall bracket
35° tilting und 35° rotable
Wall bracket black powder-coated
RL 940 Deckenhalterung
Ceiling bracket
Loudspeaker rotable mounted
Standard height between adapter plate and bracket: 300 mm
other length available
Ceiling bracket black powder-coated
Brochure and Dokumentation
Documentation to the RL941
Installation instructions for floor bracket stand
Technical Drawings
Technical drawing to the loudspeaker
RL941 floor bracket stand.pdf
Technical drawing to the floor bracket stand with details of the standard heights
RL941 pedestal.pdf
Technical drawing to the pedestal