JavaScript is deactivated in your webbrowser. Please activate Javascript or update your browser.

BASIS 10

Active-bass-loudspeaker in sealed enclosure

The active bass loudspeaker BASIS 10 serve as complement for the lower octave of our active studio monitors and as central bass unit in stereo reproduction.

(Shown colors and solid woods: satin matt black and white and american cherry natural)

BASIS 10

We have reimagined the compact subwoofer to create the perfect partner for our smallest loudspeakers. The BASIS 10 not only impresses with its compact form factor, but also leaves nothing to be desired thanks to its remarkable low-end performance and innovative features.

With an amplifier power of 800 W per channel, this subwoofer delivers powerful and precise bass. A dedicated channel allows for the connection of an additional passive subwoofer or passive loudspeaker. Expanding the setup with a second subwoofer enables a stereo bass configuration, which not only doubles the output but also simplifies placement within the listening environment. All channels are also equipped with configurable DSP filters, allowing the sound to be optimally adapted to the acoustic conditions of the room. The distance from the main speaker to the subwoofer can be compensated via a time delay adjustable up to 2000 ms.

Thanks to the optional Dante interface with built-in network switch, the BASIS 10 is perfectly suited for professional audio setups. The input signals from the Dante audio stream can also be routed to the analog XLR outputs, making even analog studio monitors Dante-capable within this setup. The BASIS 10 is not just a subwoofer, but a statement for the highest audio quality and flexibility.

Experience the perfect fusion of design, performance, and technology.

Application Area

Bass extension for our nearfield monitors and high-end loudspeakers

Design

Subwoofer in a sealed enclosure

Maximum Sound Pressure Level
measured at f = 63 Hz

109 dB / r = 1 m (3.3 ft); 2 pi

Frequency Response
(with standard preset)

25 Hz … 100 Hz, -6 dB; 2 pi

Calibration of Acoustic Output Level
measured at PE = -14 dBu and f = 50 Hz

75 dB / r = 1 m (3.3 ft)

Maximum Input Level

+24 dBu

Output Level CH1, CH2

+12 dBu

Input Impedance

21 kΩ balanced

Bass Output Level

Adjustable

Output Power of PWM Power Module

2x 800 W at 4 Ω

DSP Crossover

LP: 24 dB/oct (configurable up to max. 48 dB/oct)

HP: 12 dB/oct (configurable up to max. 48 dB/oct)

Equalizer

10 freely programmable filters per channel

Presets

100 programmable presets

Delay Compensation

All channels delayable up to 2000 ms (667 m or 2188.3 ft)

Operating Voltage

80 V – 264 V; 47 Hz – 63 Hz

Power Consumption

max. 500 VA

Mains Connection

IEC Power Connector

Level and Signal Indicators

LED bar on the rear panel

Input Connectors

2× XLR3F

optional Dante via RJ-45

Output Connectors

2× XLR3M

1× Speakon NL4 for satellite or passive subwoofer

optional Dante via RJ-45

Control Inputs

2× RJ-45 Ethernet (Dante option with integrated switch)

1× USB

Speaker Configuration

1× 200 mm (8“) long-excursion driver

Dimensions H×W×D

240 mm × 240 mm × 320 mm (9.45 in x 9.45 in x 12.60 in)

Weight

14,2 kg (31,4 lbs)

Climatic Conditions

Operating Temperature Range

+15 °C ... +35 °C (59°F ... 95°F)

Storage Temperature Range

-25 °C ... +45 °C (-13°F ... 113°F)

Relative Humidity

45 % ... 75 %

Enclosure Finish

Cabinet and front panel in MDF black semi-gloss varnish;

customizable cabinet in other colours or veneers on request;

customizable front panel in other colours or solid wood on request

BASIS 10P

Passive version of the subwoofer BASIS 10 to connect to the dedicated channel of the BASIS 10.
Expanding the setup with a second subwoofer enables a stereo bass configuration, which not only doubles the output but also simplifies placement within the listening environment.
We can optionally supply the appropriate Speakon connection cable in the length of your choice.

Brochure and Documentation

Brochure

Instructions for installation and use

Technical drawings

Technical drawing to the subwoofer

Standard veneer ash black (RAL9005), optional veneers and optional colours

We offer our loudspeakers in standard veneer ash black (RAL9005) or for an additional charge in different optional veneers respectively optional colours. This website provides an overview on the optional veneer and lacquer styles. We are pleased to check if your desired individual veneer and colour can be realised.

Important information about deviations from sample pattern

Wood is a natural product. Even the most thorough manufacturing can result in deviations in colour or structure and is no cause for complaint.
Images are represented differently on every screen and hence not colour-proof.

**Birds eye maple nature (In short supply! Only while stocks last.)**

**Birdseye maple stained (In short supply! Only while stocks last.)**

**High gloss varnish in RAL color (no piano varnish)**